water monitoring
Online Turbidity Meter for Water Treatment

BSQ-Mini Water Quality Transmitter

EC/ER/pH/series transmitter is mainly used for water quality monitoring sensor signal transmission, through 4-20mA, RS485 or TTL level to amplify the weak signal output from the sensor for transmission, which can be easily communicated with PLC, configuration software, microcontroller, etc. Communication protocol using standard MODBUS RTU protocol.
This product can be widely used in metallurgical manufacturing, electric power, light industry, textile, water treatment equipment, water pipe network and scientific research and other industrial sectors.
Note: EC/ER transmitter module is a general-purpose module and PH module is a general-purpose module. The two modules have the same appearance, different hardware, distinguished by the logo on the panel, so pay attention when using them. One transmitter module can only be adapted to one electrode input.

SPECIFICATION

EC conductivity transmitter range: 0~2000us/cm; optional 0-4000uS, 0-10.00mS, 0-20.00mS, 0-200.0mS;
ER resistivity transmitter; range: 0~18.2MΩ
pH transmitter; range: 0~14.00 pH
Note: One module of transmitter can only match one electrode, EC is a separate module, PH is another module

Conductivity - Technical specifications

Mating electrode: 1.0cm-1 ABS plastic platinum black electrode as standard; other specifications are available.

Electrode thread: 1/2″NPT

Cable length: 5 m standard for plug-in type; 1.5 m standard for quick release type.

Medium temperature: 0~50℃

Temperature compensating component: NTC10k

Temperature compensation: 25℃ as the reference, automatic compensation

Resistivity - Technical specifications

Mating electrodes: standard 0.05cm-1 316L stainless steel electrodes available as plug-in or quick release.

Electrode thread: 1/2″NPT

Cable length: 5 m standard for plug-in type; 1.5 m standard for quick release type.

Medium temperature: 0~50℃

Temperature compensating component: NTC10k

Temperature compensation: 25℃ as the reference, automatic compensation

pH (acidity/alkalinity) - technical specifications

Mating electrodes: online PH electrode, ABS two composite electrode (2-wire system).

Electrode thread: 3/4″NPT

Cable length: 5m as standard.

Medium temperature: 0~50℃

Temperature compensating component: NTC10k

Temperature compensation: manual or automatic compensation based on 25°C.

Other common technical specifications

Output current: 4-20mA / optional: 1-5V / 2-10V; 4-20mA corresponding range can be set, default is 0 - full scale.

Relay output: settable high limit/low limit relay alarm output, contact current 24V/3A, 220V/2A; (passive dry contact)

Power supply: DC12V-28V

Environmental conditions: (1)Temperature 0~50℃ (2)Humidity≤85%RH;

Dimension: 122×72×45mm (L×W×H)

Mounting method: rail mounting

Online Turbidity Meter for Water Treatment Online Turbidity Meter Online Turbidity Controller for Water Treatment Online Turbidity tester for waste Water Treatment

Download Catalog For More Products